Hurricane Protection Services - Storm Shutter Protection with the Finest Hurricane Shutters

Hurricane Protection Services sells and installs Eastern Metal Supply’s .050 Aluminum panels. These panels are approved under the Miami-Dade County Building Code, Florida Building Code and International Building Code Regulations. The features of Eastern Aluminum panels are:

• Cost effective means of storm protection that can be installed with little or no architectural impact
• Can be installed vertically or horizontally with a wide variety of tracking and mounting conditions and build outs
• Mounting options include: H-header, U-header, F-track, Studded Angle, Snap Cap and Direct Mount (Most tracks come with build out and can be installed as removable)
• System may be installed with a removable panel for egress options
• Span up to 13’ (non- HVHZ) and 10’ (HVHZ with proper separation to glass)
• Can be combined with Clear Lexan Panels to allow light and visibility
• Often the only storm protection option on openings with obstructions

Hurricane Protection Services sells and installs Transparent Protection Systems Clear Guard GE Lexan Polycarbonate Storm Panels. These panels are approved under the Miami-Dade County Building Code, Florida Building Code and International Building Code Regulations. The features of TPS Clear Guard panels are:

• Cost effective means of storm protection that can be installed with little or no architectural impact
• Can be installed vertically or horizontally with a wide variety of tracking and mounting conditions and build outs
• Mounting options include: H-header, U-header, F-track, Studded Angle, Snap Cap and Direct Mount (Most tracks come with build out and can be installed as removable)
• Span up to 10’ (non-HVHZ) and 7’6” (HVHZ with proper separation to glass and close off angles)
• Allows both light and see-through visibility; eliminating “cave effect”
• Guaranteed by G. E. to resist cracking and discoloration for 10 years. Their construction is resistant to the degrading effects of UV light radiation
• Storm Panels are often the only storm protection option on difficult to protect openings with obstructions

• H-header and U-header – Top tracks for vertical installations with a channel to insert panels into; no positive connection required. H- header for wall mounts and U-header for ceiling mounts
• Studded angle – 2x2 structural angle with studs every 6” or 12”. Can be used as a top or bottom track on vertical installation and the left or right track on horizontal installations
• F-track – A low profile track with a channel that holds f-track bolts (in lieu of studs) which can slide in the channel and adjust accordingly. Can be used as a top or bottom track on vertical installation and the left or right track on horizontal installations
• Snap Cap – This track is a 2” wide with studs every 6” and a cover cap that conceals studs when track is not in use. Can be used as a top or bottom track on vertical installation and the left or right track on horizontal installations
• Direct Mount – Panels are attached with panel mates or lead anchors every 12”. Direct mounts can be used on vertical and horizontal applications